2004 Mazda B3000
Mileage
129,132
Service Date
5/22/2024
Services Performed
- Watched data pid for engine coolant temp held engine rpm at 2k for 15 minutes coolant temp would never go above 170’f recommend replacing thermostat and top off coolant and recheck.
- INCLUDES SCANNING OF PERTINENT MODULES, RESEARCH OF CODES FOR POSSIBLE CAUSES, AND ESTIMATING TIME NEEDED TO DIAGNOSE CODES(S) Inspected pulled code p0128 coolant thermostat regulating temp below threshold, inspected coolant full and clean . watched data pid for engine coolant temp held engine rpm at 2k for 15 minutes coolant temp would never go above 170’f recommend replacing thermostat and top off coolant and recheck
- Park brake does hold goes half way down and holds, can adjust rear brake shoes if customer would like and during oil change can inspect rear brake linings
- https://avlink.io/l/3zEgDfi
- Lubricate and check chassis. Change oil and oil filter. Check air filter and breather filter. Check all fluid levels and tire pressures. Preform basic safety inspection. Road test vehicle. Change oil and oil filter.
- Rotated tires front brakes 5 mm inner and outer pads rear drums are good lining in good condition hand torque 100 ft lbs
- Reset maintenance light
- Replaced thermostat and gasket top of coolant test drove good
- 36 psi
Mary C. gave our service a 5 star review on 5/23/2024